Pet Flap Installation Dubai

Getting a pet flap installed sounds simple until you look at the door itself. A wooden door, aluminium door and glass door each require a different approach. With glass, the flap opening has to match the panel and the selected pet flap, so planning the job properly matters from the beginning.

Pet flap installation Dubai by UAE Fixer covers the glass work as well as the fitting. We can work with customer-supplied pet flaps and handle the required measurement, fabrication, replacement, delivery and installation.

Whether you have a cat or dog, a sliding glass door or a patio entrance, we can first assess the existing setup and then recommend the practical glass solution.

Start With the Pet, Not Just the Door

The right pet flap depends on the animal using it.

A small cat and a large dog obviously need different opening dimensions. However, size is not the only consideration. You may also want a particular locking system or access-control feature.

Common options include:

Manual pet flaps
Lockable pet flaps
Magnetic pet flaps
Microchip pet flaps
Electronic pet flaps
Cat flaps
Dog flaps

You can purchase your preferred model yourself and provide it to us for installation.

Before fabrication, we need the product details because the required opening in the glass depends on the particular flap.

Your Existing Door Determines the Work

Once we know which pet flap you want, we look at the existing door.

For example, you may have:

A sliding glass door
The replacement panel must suit the sliding arrangement and leave enough space for normal door movement.

A hinged glass door
The location of the pet flap needs to work with the door’s structure and hardware.

A balcony door
The available glass area and surrounding frame need to be checked before deciding where the flap should go.

A patio or terrace door
The pet’s access route and the door configuration both influence the installation.

A double-glazed door
The glass unit requires additional planning because the replacement must suit the existing glazing arrangement.

So, we do not recommend choosing the glass specification based only on a photograph. Proper dimensions and the actual door construction provide a better basis for fabrication.

What Happens During a Glass Pet Flap Installation?

The work normally follows a clear sequence.

1. Share the details

Send us photographs of the door, available dimensions and details of your selected pet flap.

This lets us understand the project before arranging the next step.

2. Check the glass

We identify the glass type, approximate thickness, panel dimensions and door arrangement.

If the door uses double glazing, we also consider the construction of the sealed unit.

3. Confirm the pet flap opening

The opening must match the selected pet flap. Therefore, we use the manufacturer’s dimensions or the actual product information rather than guessing the aperture.

4. Plan the replacement

For many toughened or double-glazed glass doors, the opening needs to be prepared during glass fabrication. In that situation, we manufacture a replacement panel or unit with the required opening.

5. Remove the existing panel

Once the replacement glass is ready, the existing panel can be dismantled carefully.

6. Install the new glass

The replacement panel goes into the existing frame when the frame remains suitable for reuse.

7. Fit the pet flap

Finally, we install the selected pet flap into the prepared opening and check the installation.

This approach keeps the glass work and pet-flap fitting coordinated instead of treating them as two unrelated jobs.

Can You Bring Your Own Pet Flap?

Absolutely.

Many customers already know which product they want for their pet. You can therefore purchase the flap yourself and ask UAE Fixer to handle the glass installation.

This can include different types of pet doors, from basic manual flaps to models with locking, magnetic, microchip or electronic functions.

However, send us the model information before we fabricate the glass.

Why?

Because pet flaps do not all use the same opening dimensions. The external frame may also differ from the actual required glass aperture.

A quick check at the beginning can prevent an unsuitable glass opening later.

Glass Thickness Can Be Selected for the Application

There is no single glass thickness that suits every installation.

The suitable specification depends on the size and construction of the replacement panel, the door system and the glazing arrangement.

UAE Fixer can work with the appropriate glass thickness for the application, including projects that require double-glazed glass.

For double-glazed doors, we consider the complete unit rather than treating one pane as a standalone piece.

That distinction matters because the replacement needs to fit the existing frame and glazing arrangement.

Double-Glazed Pet Flap Installation

Double glazing deserves particular attention.

If your existing door has a sealed double-glazed unit, the pet flap opening normally needs to be incorporated into a replacement unit rather than cutting the finished sealed glass on site.

The replacement can be fabricated according to the required dimensions and pet flap specifications.

Before fabrication, we can check:

Overall glass size
Unit thickness
Frame dimensions
Pet flap opening
Flap model
Installation position
Door movement
Existing hardware

Once these details are confirmed, the replacement unit can be prepared accordingly.

Learn more about our pet flap installation in glass service.

A Good Position Makes Daily Use Easier

The pet flap should sit at a practical height for the animal.

For cats, the opening normally needs to accommodate their smaller body size. Dogs may require a larger opening and a different position.

At the same time, the glass panel may limit where the opening can go.

That is why we consider both factors together.

The installation position should also avoid unnecessary interference with handles, locks, hinges or sliding mechanisms.

If you are unsure about the position, provide a photograph of the complete door and tell us the size of your pet. We can discuss the available options before fabrication.

Suitable for Different Dubai Properties

Pet flap installations can be considered for:

Apartments
Villas
Townhouses
Private residences
Patio areas
Balcony doors
Terrace doors
Selected commercial or pet-friendly spaces

However, apartment and community properties can have their own rules.

Before modifying a glazed door, check with your landlord, building management or developer if approval is required. UAE Fixer can assist with approval-related requirements when requested, although the actual conditions depend on the property.

What If You Want to Keep the Existing Glass?

This is common among tenants.

If the current glass needs replacement to create the pet flap opening, you can ask about keeping the original panel.

The replacement panel can then serve as the working installation while the original remains available for possible future reinstatement, depending on the property’s requirements and the condition of the original glass.

This option can be useful when you expect to move later.

The exact arrangement depends on the door design and the way the glass is installed.

Services Available From One Team

UAE Fixer can manage the complete glass side of the project.

Services include:

Measurement
Glass assessment
Custom fabrication
Glass supply
Delivery
Existing glass removal
Replacement glass
Pet flap fitting
Dismantling
Repair
Maintenance
Installation

You do not need to arrange a separate glass supplier for the replacement panel and then find another installer for the pet flap.

We can coordinate the work as one project.

How Much Does Pet Flap Installation Cost in Dubai?

The estimated price for pet flap installation Dubai is around AED 999–1,799.

The actual quotation depends on the project specifications.

For example, the price can change according to:

Glass size
Glass type
Suitable glass thickness
Single or double glazing
Pet flap type
Opening dimensions
Profile or frame requirements
Existing glass removal
Installation conditions

A basic pet flap and a large double-glazed replacement panel will not have the same cost.

For that reason, we provide an estimate based on your actual requirements rather than using one fixed price for every installation.

Get an Initial Estimate From Photos

You can start the enquiry without arranging a site visit immediately.

Send us:

A clear photograph of the full door
Close-up photographs of the frame
Approximate glass dimensions
Your pet’s type and size
The pet flap you want to use

If you already purchased the flap, send a photograph of its packaging or model information as well.

We can review the details and provide an initial estimate.

A site visit can be arranged after confirmation of the job order for proper measurement and assessment.

Frequently Asked Questions

Can I provide my own pet flap?

Yes. UAE Fixer can install a customer-supplied pet flap, provided the product is suitable for the proposed glass installation.

Can you install a cat flap in glass?

Yes. We can arrange suitable glass fabrication and install a cat flap for a suitable door configuration.

Can you install a large dog flap?

Yes. The glass panel and opening can be planned around a suitable dog flap and the dog’s dimensions.

Can you install an electronic pet flap?

Yes, customer-supplied electronic and microchip pet flaps can be considered. We need the model information before fabricating the glass.

Can you install a pet flap in double glazing?

Yes. A replacement double-glazed unit may be required, with the opening prepared according to the selected pet flap.

Can you install a pet flap in a sliding glass door?

Yes. We can assess the sliding door and determine the appropriate replacement glass arrangement.

Will you cut my existing tempered glass?

For many finished toughened glass panels, the practical solution is a replacement panel manufactured with the opening prepared in advance. The exact method depends on the existing glass and door system.

Can the existing frame remain?

Often, yes. If the existing frame is suitable and in good condition, the replacement glass can be installed within it.

Can you remove the old glass?

Yes. Dismantling and removal of the existing glass can be included in the service.

Can I get an estimate through WhatsApp?

Yes. Send photographs, dimensions and pet flap details to +971 54 784 8786 for an initial assessment.

Do you provide site measurement?

Yes. A site visit can be arranged after the job order is confirmed.

Is pet flap installation available throughout Dubai?

Yes. UAE Fixer provides this service across Dubai, subject to the property’s access and project requirements.

Pet Flap Installation for Glass Doors in Dubai

A pet flap can make everyday access easier for both pets and owners, but glass installations need proper preparation. The selected flap, glass specification, opening size and door configuration all need to match.

UAE Fixer can take care of the measurement, fabrication, replacement, delivery and installation, while you can supply the pet flap that suits your cat or dog.

Send your glass-door photograph and pet flap details on WhatsApp at +971 54 784 8786 for an initial quotation.

Learn more about our pet door installation service.