Shower Enclosure Price Dubai
Planning a new shower enclosure and trying to work out the budget? The price can vary quite a bit depending on the enclosure layout, glass type, door style, size, hardware and finish.
In Dubai, a practical budget for a custom glass shower enclosure is approximately AED 1,100 to AED 2,500+. A compact enclosure with a simple configuration can sit near the lower end, while a large frameless or multi-panel design with premium hardware can cost considerably more.
The estimate matters, but the configuration matters just as much. Two shower enclosures with similar dimensions may have different prices if one uses a sliding door and the other uses a hinged door, for example.
Shower Enclosure Price in Dubai
The following ranges can help you plan your bathroom budget:
| Shower enclosure type | Estimated price |
|---|---|
| Compact fixed-panel enclosure | AED 1,100–1,300 |
| Small corner enclosure | AED 1,200–1,450 |
| Hinged-door enclosure | AED 1,300–1,650 |
| Fixed panel + hinged door | AED 1,350–1,750 |
| Semi-frameless enclosure | AED 1,350–1,850 |
| Sliding glass enclosure | AED 1,500–2,000 |
| Frameless shower enclosure | AED 1,500–2,100 |
| Large custom enclosure | AED 1,900–2,500+ |
These figures are estimated prices for budgeting, not fixed quotations. The final cost depends on the actual measurements, specifications and installation conditions.
What Is Included in a Shower Enclosure?
A shower enclosure normally consists of several components working together rather than simply one piece of glass.
Depending on the design, it may include:
- Fixed glass panels
- Shower glass door
- Hinges
- Handles or knobs
- Sliding rollers and tracks
- Support bars
- Wall-to-glass fittings
- Glass-to-glass fittings
- Profiles where required
- Seals and installation accessories
- Professional installation
The exact combination depends on the layout.
A simple fixed enclosure can therefore cost much less than a large enclosure with several panels, a door and specialised hardware.
Main Factors That Affect Shower Enclosure Price
For a detailed cost breakdown, see our sliding shower enclosure price guide.
1. Enclosure Size
Size is one of the most obvious cost factors.
A compact corner shower needs less glass than a wide wall-to-wall enclosure. Larger panels can also require additional support or specific hardware because of their weight and dimensions.
The height of the enclosure also affects the quantity of glass required.
2. Number of Glass Panels
A basic design might use one fixed panel and one door.
Another bathroom may require two fixed panels plus a door. A three-sided enclosure may require even more glass.
As the number of panels increases, material, fittings and installation time generally increase as well.
3. Framed, Semi-Frameless or Frameless
The style of the enclosure has a direct effect on cost.
Framed: Profiles surround more of the glass and can provide a practical enclosure at a comparatively lower price.
Semi-frameless: Uses a combination of glass and selected framing or profiles.
Frameless: Creates a cleaner, more open appearance and relies on suitable safety glass and specialised hardware.
Frameless designs generally sit toward the higher end of the price range.
Hinged vs Sliding Shower Enclosures
The door mechanism is another important consideration.
Hinged Shower Enclosure
A hinged door swings open using glass hinges. It offers a clean appearance and works well when sufficient clearance exists outside the shower.
A fixed panel can be combined with the hinged door to create a more enclosed arrangement.
Estimated price: AED 1,300–1,750 for many standard configurations.
Sliding Shower Enclosure
A sliding system uses tracks and rollers instead of a conventional swinging door.
It can be useful in bathrooms where there is limited clearance for a hinged door.
Because the system requires additional sliding hardware, the price can differ from a comparable hinged arrangement.
Estimated price: AED 1,500–2,000 for common custom configurations.
Glass Options for Shower Enclosures
The glass specification should suit the application, panel dimensions and hardware.
UAE Fixer works with 8mm, 10mm and 12mm clear safety glass, with the appropriate specification selected according to the installation.
Depending on the design, privacy options can include:
- Clear glass
- Frosted glass
- Semi-frosted glass
- Other custom finishes where suitable
Clear glass remains a popular choice when the goal is to maintain an open visual appearance.
Frosted or semi-frosted glass can provide additional privacy while still allowing light into the shower area.
Does Glass Thickness Change the Price?
Yes.
The glass thickness can affect material cost, weight and hardware requirements. However, choosing the thickest glass is not automatically the best option.
For shower enclosures, the appropriate specification should take account of:
- Panel dimensions
- Door size
- Configuration
- Hardware
- Fixing method
- Application requirements
UAE Fixer can recommend a suitable specification based on the actual design.
Hardware and Finish Options
Hardware can significantly influence the appearance of a shower enclosure.
Available finishes include:
- Chrome mirror
- Chrome matte
- Matte black
- Gold mirror
- Gold matte
- Rose gold
- Custom colours
Chrome is the standard/default finish. However, a different finish can be selected to coordinate with the existing bathroom fittings.
For example, matte black hardware can work well with contemporary dark fixtures, while chrome provides a more traditional and versatile appearance.
Shower Enclosure Prices by Bathroom Layout
The bathroom layout often determines which enclosure configuration makes sense.
Corner Shower Enclosure
A corner enclosure can make efficient use of two intersecting walls.
It may use a fixed panel and door, or a more enclosed multi-panel configuration.
Estimated price: AED 1,200–1,700
Wall-to-Wall Enclosure
This arrangement spans the width between two walls.
It can provide strong separation between the shower and the rest of the bathroom, particularly when combined with a hinged or sliding door.
Estimated price: AED 1,400–2,100
Walk-In Shower Enclosure
A walk-in configuration normally uses one or more fixed panels while keeping the entrance open.
It creates an open bathroom appearance but requires careful positioning of the glass to manage water splash.
Estimated price: AED 1,300–1,900
Three-Sided Shower Enclosure
A three-sided design may be suitable when the shower area does not have enough surrounding walls for a simple corner enclosure.
The additional glass generally increases the material and installation cost.
Estimated price: AED 1,600–2,300+
Does a Frameless Enclosure Cost More?
Generally, yes.
Frameless shower enclosures use a cleaner glass-focused design with limited visible framing. They require suitable glass, precise installation and appropriate hinges, handles, support fittings or other hardware.
A typical frameless enclosure may cost around AED 1,500–2,100, while a larger or highly customised installation can exceed AED 2,500.
If you are specifically comparing frameless options, see our Frameless Shower Enclosure Dubai service page for more information.
What About a Small Bathroom?
A small bathroom does not necessarily mean a low-cost enclosure.
In fact, compact bathrooms can require more careful planning because every centimetre matters.
For example, a hinged door may interfere with a toilet, vanity or bathroom entrance. A sliding door or walk-in arrangement may therefore provide a better solution.
The final price should be based on the actual shower area rather than the overall bathroom size.
Can a Shower Enclosure Be Installed Over Existing Tiles?
Yes, shower enclosures can often be installed in existing bathrooms.
The condition and layout of the walls and floor need to be checked first. The installer should consider the tile surface, fixing points, shower tray or floor, drainage and door clearance.
This is particularly useful during bathroom upgrades where the customer wants a new glass enclosure without completely rebuilding the bathroom.
New Shower Enclosure or Replacement?
If an existing enclosure has become damaged or difficult to use, replacing the complete enclosure may not always be necessary.
Depending on the condition, you may only need:
- Glass replacement
- Door replacement
- Hinge replacement
- Handle replacement
- Roller replacement
- Door alignment
- Other hardware repair
If the existing structure is still suitable, replacing the affected component can sometimes be more economical than starting again.
For damaged or broken glass, the condition of the safety glass should be assessed before deciding on repair or replacement.
Shower Enclosure Installation Process
A good installation starts before the glass reaches the bathroom.
Step 1: Initial Enquiry
Send photos and approximate dimensions through WhatsApp, or contact UAE Fixer by phone or email.
This information helps establish the likely enclosure type and approximate budget.
Step 2: Measurements
Once the order is confirmed, a site visit is provided free of charge for measurement and installation planning.
Step 3: Select the Configuration
The enclosure layout, door movement, glass specification, hardware and finish are confirmed.
Step 4: Fabrication and Supply
The glass and required components are prepared according to the approved measurements and configuration.
Step 5: Installation
The panels, door and hardware are installed and aligned at the property.
Step 6: Final Inspection
The completed enclosure is checked for door movement, alignment, fittings and overall installation quality.
How to Get a Shower Enclosure Price
You do not necessarily need to wait for a site visit to start the quotation process.
Send:
- Bathroom photos
- Shower opening width
- Approximate height
- Preferred enclosure style
- Door preference
- Glass preference
- Hardware finish, if known
For example, if you send a photo showing a corner shower area and mention that you want a frameless hinged enclosure, UAE Fixer can use that information to prepare an initial estimate.
The final quotation can then be confirmed after measurement.
Why Choose UAE Fixer?
UAE Fixer handles shower enclosure projects from measurement through fabrication, supply and installation.
The service covers apartments, villas and commercial properties in Dubai, with options for new installations as well as replacement and repair work.
Customers can choose from different enclosure layouts, glass specifications, hardware and finishes according to their bathroom and budget.
The service includes:
- Free quotations
- Measurement service
- Custom fabrication and supply
- Professional installation
- Shower enclosure replacement
- Shower glass replacement
- Hardware repair and replacement
- 1-year warranty
- Guaranteed installation
- Full satisfaction
Frequently Asked Questions
How much does a shower enclosure cost in Dubai?
A custom shower enclosure generally costs around AED 1,100–2,500+. Compact designs cost less, while larger frameless, sliding or multi-panel enclosures can cost more.
What is the cheapest shower enclosure option?
A compact fixed-panel or simple corner configuration is usually among the more economical choices. A reasonable starting budget is approximately AED 1,100–1,300.
How much does a frameless shower enclosure cost?
A typical frameless shower enclosure may cost approximately AED 1,500–2,100, while larger or highly customised designs can reach AED 2,500+.
Are sliding shower enclosures more expensive than hinged ones?
Not necessarily in every case. Sliding systems use tracks and rollers, while hinged systems require suitable hinges and door hardware. The overall price depends on the size, glass, configuration and hardware.
Does shower enclosure price include installation?
The estimate should be checked against the specific quotation because installation requirements vary. UAE Fixer provides supply and installation as part of its shower enclosure service.
Can you make a shower enclosure for a small bathroom?
Yes. The enclosure can be designed around the available space. Depending on the layout, a compact corner, sliding or walk-in arrangement may work better than a conventional swinging door.
Can I choose frosted glass for my shower enclosure?
Yes. Frosted and semi-frosted options can be considered when additional privacy is required.
What glass thickness do you use?
UAE Fixer works with 8mm, 10mm and 12mm safety glass, with the appropriate specification selected according to the dimensions, configuration and application.
Can you replace an old shower enclosure?
Yes. Existing shower enclosures can be assessed for replacement. Depending on their condition, it may be possible to replace only the damaged glass, door or hardware rather than the entire installation.
How can I get an accurate price?
Send photos and approximate dimensions by WhatsApp, phone or email. After the job order is confirmed, UAE Fixer can arrange a free site visit for measurement before finalising the quotation.
Get a Free Shower Enclosure Estimate
A shower enclosure does not need to be complicated to look good. The right layout, glass specification and hardware can make a noticeable difference to both the appearance and everyday use of the bathroom.
If you are comparing prices, send UAE Fixer a few photos and the approximate shower dimensions. You can discuss whether a framed, semi-frameless, frameless, hinged, sliding or walk-in configuration is most suitable.
WhatsApp / Phone: +971 54 784 8786
Website: https://www.uaefixer.com/